NEXOR Pipes

NEXOR HDPE pipes follow the ISO 4427 standard (Polyethylene Pipes for water supply - Specifications). The standard recommends several pipe quality tests procedures to determine the long term performance of pipes. Under normal use, HDPE pipes are designed to last for 50 years. Normal use is defined as not exceeding the pressure rating of the pipe (i.e. 16 bar for PE80 SDR 9, 12.5 bar for PE 80 SDR 11, and so on.

In addition, to the ISO standard, NEXOR pipes are subjected to other quality tests. A partial listing follows.

    Hydrostatic Strength Test

    Longitudinal Reversion

    Oxidation Induction Time

    Stresses caused during the Manufacture of Pipes

NEXOR Fittings

Our fittings follow international standards.

    PP Compression fittings  - ISO 14236, BS 5114

    PP Mechanical Clamp Saddle - JKR no . 1 . 95 (BA)    

    PP Tapping Ferrule - JKR 20200-0055-99

     PE Socket Fusion Fittings - DIN 16963

     PE Stub End - DIN 16963

Welding

NEXOR Butt Welding Guide