|
Polyethylene Solid and Annular Corrugated Pipes |
|
NEXOR Butt Fusion Pipes Butt welding results in pipe connections that are stronger than the pipe itself.
Top picture shows typical buttwelding setup. Picture below shows butt welded joints. |
|
Hydrostatic burst test of properly butt welded pipe versus poorly welded pipe
Proper butt weld results in failure on the pipe (top image) while poor butt weld results in failure on the joint (bottom image). Failure on the pipe illustrates the fact that proper butt welding results in pipe connections that are stronger than the pipe itself. Shop Drawing Contact our office for shop drawings of pipes of different pressure class. |
|
PRODUCT |
NEXOR BUTTFUSION PIPES |
|
SIZES |
63, 75, 90, 110, 125, 140, 160, 180, 200, 225, 250, 280, 315, 355, 400, 450, 500, 560, 630, 710, 800, 900, AND 1000mm |
|
PRESSURE CLASS |
PN 6, 8, 10, 12.5, 16 |
|
CUT LENGTH |
63, 75, 90, AND 110 mm are available in coils (50 / 60 meter) The rest are available in 6 and 12 meter |
|
INSTALLATION |
Butt fusion (equipment and electric generator required) |
|
FITTINGS |
Couplers are not needed for pipe to pipe connections. For elbows, tees, reducers, use NEXOR Spigot Fittings |
|
NOTES |
Difficult to install in challenging terrain, poor weather conditions. |
Send mail to admin@nexorpipes.com with questions or comments about this web site.
|